Table of Contents
Advertisement
en Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
Implement the settings for initial use before using your
appliance.
First read the information under safety → Page 2.
The appliance must be installed and connected.
After connecting the appliance to the power supply, the
GAGGENAU logo appears for approx. 30 seconds and
then the appliance displays the "Initial settings" menu.
You can configure your new appliance for initial use.
The "Initial settings" menu appears only after the appli-
ance has been connected to a power supply and
switched on for the first time, or if the appliance has
not been connected to a power supply for a number of
days.
You can change all of the settings in the basic settings
→ Page 18.
Setting the language
Requirement: The display shows the preset language.
Use the rotary selector to select the required display
1.
language.
Press
to confirm.
2.
Setting the time format
Requirement: The display shows the possible formats
24h and AM/PM. 24h is preset.
Use the rotary selector to set the required format.
1.
Press
to confirm.
2.
Set the time
Requirement: The display shows the time.
Use the rotary selector to set the required time.
1.
Press
to confirm.
2.
7 Basic operation
7.1 Activating the appliance
To exit standby mode, open the door and turn the
1.
function selector or touch a touch field.
2.
Set the required function.
7.2 Switching on the appliance
Use the function selector to set the required type of
1.
heating.
a The display shows the selected type of heating and
the suggested temperature.
If required, use the rotary selector to set the desired
2.
temperature.
a The display shows the heating symbol
a The bar displays the current heating status.
12
Setting the date format
Requirement: The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
1.
Use the rotary selector to set the required format.
Press
2.
Setting the date
Requirement: The display shows the preset date. The
daily setting is already active.
Use the rotary selector to set the required day.
1.
Press
2.
3.
Use the rotary selector to set the month.
Press
4.
Turn the rotary selector to set the year.
5.
6.
Press
Setting the temperature unit
Requirement: The display shows the possible units °C
and °F. The unit °C is preset.
Turn the rotary selector to set the required unit.
1.
Press
2.
Ending the initial use
Requirement: The display shows "Initial set-up com-
plete".
Press
▶
a The appliance switches to standby mode.
a The display shows the standby screen.
a The appliance is ready to use.
Heating up the appliance
Ensure that there is no leftover packaging in the
1.
cooking compartment.
To eliminate the new-appliance smell, heat up the
2.
empty appliance for an hour at 200 °C in the Hot air
type of heating
Cleaning accessories
Before first use, clean the accessories thoroughly
▶
using hot soapy water and a soft cloth.
a Once the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out
Note: If the temperature is set to less than 70 °C, the
cooking compartment light will remain switched off.
7.3 Switching off the appliance
Turn the function selector to .
▶
7.4 Switching on the appliance after
automatic switch-off
Requirement: After prolonged operation, the
.
→ "Automatic switch-off", Page 10 switches off the ap-
pliance.
Turn the function selector to .
1.
Switch the appliance back on again.
2.
to confirm.
to switch to the month setting.
to switch to the year setting.
to confirm.
to confirm.
.
with the door closed.
.
Advertisement
Table of Contents
