Table of Contents
Advertisement
6 Before using for the first time
Clean the appliance and accessories.
6.1 Initial use
Implement the settings for initial use before using your
appliance.
First read the information under safety → Page 2.
The appliance must be installed and connected.
After connecting the appliance to the power supply, the
GAGGENAU logo appears for approx. 30 seconds and
then the appliance displays the "Initial settings" menu.
You can configure your new appliance for initial use.
The "Initial settings" menu appears only after the appli-
ance has been connected to a power supply and
switched on for the first time, or if the appliance has
not been connected to a power supply for a number of
days.
You can change all of the settings in the basic settings
→ Page 23.
Setting the language
Requirement: The display shows the preset language.
Use the rotary selector to select the required display
1.
language.
Press
to confirm.
2.
Setting the time format
Requirement: The display shows the possible formats
24h and AM/PM. 24h is preset.
Use the rotary selector to set the required format.
1.
Press
to confirm.
2.
Set the time
Requirement: The display shows the time.
Use the rotary selector to set the required time.
1.
Press
to confirm.
2.
Setting the date format
Requirement: The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
Use the rotary selector to set the required format.
1.
Press
to confirm.
2.
Setting the date
Requirement: The display shows the preset date. The
daily setting is already active.
Use the rotary selector to set the required day.
1.
Press to switch to the month setting.
2.
7 Basic operation
7.1 Activating the appliance
To exit standby mode, open the door and turn the
1.
function selector or touch a touch field.
Set the required function.
2.
7.2 Opening the appliance door
Always open the appliance door as far as it will go.
▶
Before using for the first time en
Use the rotary selector to set the month.
3.
Press to switch to the year setting.
4.
Turn the rotary selector to set the year.
5.
Press
to confirm.
6.
Setting the temperature unit
Requirement: The display shows the possible units °C
and °F. The unit °C is preset.
Turn the rotary selector to set the required unit.
1.
Press
to confirm.
2.
Fitting the grease filter
Hook the enclosed grease filter → Page 7 onto the
▶
two bolts on the back wall of the cooking compart-
ment.
Do not scratch the back wall of the cooking com-
‒
partment.
Ending the initial use
Requirement: The display shows "Initial set-up com-
plete".
Press
.
▶
a The appliance switches to standby mode.
a The display shows the standby screen.
a The appliance is ready to use.
Cleaning the door pane
Note: To ensure tightness, the door seal is lubricated
at the factory. Residue may remain on the door pane.
Before using for the first time, clean the door pane
▶
with glass cleaner and a window cloth or a mi-
crofibre cloth.
Do not use a glass scraper.
Cleaning accessories
Before first use, clean the accessories thoroughly
▶
using hot soapy water and a soft cloth.
Heating up the appliance
Ensure that there is no leftover packaging in the
1.
cooking compartment.
Remove any accessories from the cooking compart-
2.
ment.
To eliminate the new-appliance smell, heat up the
3.
empty appliance with the door closed.
The ideal setting for heating is and 200 °C for
one hour.
In this position the appliance door does not swing
back.
7.3 Switching on the appliance
Use the function selector to set the required type of
1.
heating.
a The display shows the selected type of heating and
the suggested temperature.
13
Advertisement
Table of Contents
