Table of Contents
Advertisement
Shutting down the projector
1. Press and hold the power button
on the projector for over 2 seconds will shut down directly.
I
I
2. The power LED will flash a breathing green pattern (see
LED indicators on page
18). The fans may continue to run in order to cool the system.
If the projector will not be used for an extended period, unplug the power cable from the power outlet and remove the batteries from the remote
control.
2 seconds
Setting the projector to power saving mode
To save power, you can set the projector and the ATV dongle to power saving mode when they are not in use.
1. Press the power button on the projector or remote control to bring up the power menu.
2. Select Power Saving to enable power saving mode. The light source will be turned off, and the fan speed will be reduced. The projector will be
turned off automatically in 15 minutes if there is no further action to the projector.
3. To exit power saving mode, press any key on the projector or remote control, and the screen will be back.
39
Advertisement
Table of Contents
