Concentrate Handling And Loading - Cornelius QUEST ELITE 4290 Installation Manual

Table of Contents

Advertisement

QUEST ELITE 4 Flavor Installation, Service & Decommissioning Manual

CONCENTRATE HANDLING AND LOADING

It is recommended that the concentrate be thawed in a refrigerated 35°F to 40°F (1.6°C to 4.4°C) compartment for a minimum of
48 hours prior to loading it into the Quest Juice Dispenser.
!
WARNING:
Concentrate must be completely thawed and within the temperature range of 35°F to 40°F (1.6°C to 4.4°C) prior to loading.
Failing to supply concentrate inside the recommended temperature range, especially below 35°F (1.6°C), causes an out of BRIX
drink (refer to the BRIXing Procedure section for details).
L
C
OADING
ONCENTRATE
The Quest Juice Dispenser is designed to use either disposable juice concentrate containers or the optional Cornelius generic
refillable container (sold separately).
1. Thoroughly shake concentrate container prior to use.
2. Place concentrate containers on the dispensing platform shelf inside the refrigerated cabinet.
3. Engage the concentrate container by pressing it downward into the bottle adapter opening on the dispensing platform.
NOTE: Be sure to lubricate the o-ring seal on the container nozzle. This ensures a good seal and allows the pumps to
draw concentrate from the containers more easily. Failure to create a good seal at this connection may result
in weak drinks and/or seepage of concentrate.
4. Prime each pump by closing the cabinet door and press each dispense button until concentrate flows from the dispense
nozzles.
Concentrate Storage
Four 0.8 gallon (3.0 liter) disposable bottles.
Publication Number:721Q45112MNL
Figure 27. Refillable Concentrate Container
- 28 -
© 2022, Marmon Foodservice Technologies Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quest elite 4000Quest elite 4000 vertical721q04101ju2

Table of Contents