Semi Annually; Clean Water Inlet Strainer; Clean Chassis Interior - Cornelius QUEST ELITE 4290 Installation Manual

S A
EMI NNUALLY
! CAUTION:
The following procedures require removal of the dispenser side panel(s). Disconnect the power cord (See Figure 19.) from the
receptacle prior to proceeding.

Clean Water Inlet Strainer

1. Remove the right side panel from the dispenser.
2. Turn off the water supply to the dispenser.
3. Remove the access port from the "Y" shaped water inlet solenoid located on the right side of the dispenser. (See Figure
20)
4. Clean and reinstall the stainless steel water strainer.

Clean Chassis Interior

1. Disconnect power from the dispenser.
2. Remove the top and rear panels; then remove the side panels.
3. Clean the condenser cooling fins
4. Clean the air inlet grilles located on the rear and top panels of the dispenser.
5. Clean the interior base.
6. Wipe the fan blades clean.
7. Reinstall the right side panel, turn on the water supply, and plug the dispenser into the power receptacle.
© 2022, Marmon Foodservice Technologies Inc.
QUEST ELITE 4 Flavor Installation, Service & Decommissioning Manual
Figure 36. Pull AC Plug from Wall Outlet
Figure 37. Right Side of Dispenser
- 35 - Publication Number:721Q45112MNL