Toshiba MMY-MUP0721HT9P-UL Service Manual page 71

When switching from the wired remote controller (RBC-AWSU**)
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setup while the air conditioner is not working.)
Field setting menu (2/3)
6.Setting louver position
7.Setting timer operation mode
8.Easy I.DN setting
9 9 .DN setting
10.Reset Power Consumption data
U1
U2
1
Push the [ Menu] button to display the
menu screen
2
Push and hold the [
the [ ] button at the same time to
display the "Field setting menu".
→Push and hold the buttons for more than 4
seconds
3
Push the [ ] / [
"9.DN setting" on the "Field setting menu"
screen, then push the "
button.
→ Push the [
outdoor unit and push the
" Set" [
→ For a connected system, select the outdoor unit.
U1: Header outdoor unit, U2~U4 : Forower outdoor
unit
(The fan of the selected outdoor unit will operatre.)
→ Move the cursor to select "Code(DN)" with the
[ ] button, then set
"Code(DN)" with the [
→ Move the cursor to select "Data" with the
[ ] button, then set "Data" with
the [ ] / [
- 71 -
Menu] button and
] button to select
Set" [ Set/Fix]"
] / [ ] button to select the
Set / Fix] button.
] / [ ] button.
] button.