Toshiba MMY-MUP0721HT9P-UL Service Manual page 118

Confirming the indoor unit addresses and the position of an indoor unit
using the remote controller
Confirming the numbers and positions of indoor units
To see the indoor unit address of an indoor unit which you know the position of
When the unit is individual (the indoor unit is paired with a wired remote controller one-to-
one), or it is a group-controlled one.
<RBC-AMT*>
(Execute it while the units are running.)
1
Push the button if the units stop.
2
UNIT LOUVER
Push the button (left side of the button).
1-1
A unit numbers
shows the system address and indoor unit address of the unit.
When 2 or more indoor units are connected to the remote controller (group-controlled units), a number of
other connected units appears each time you push the
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL
is indicated on the LCD (it will disappear after a few seconds). The indicated number
CODE No.
UNIT No.
1
ON / OFF
Starts
running
2
UNIT LOUVER
button (left side of the button).
- 118 -