Toshiba MMY-MUP0721HT9P-UL Service Manual page 67

No. Item
18 Louver control
<<Individual air direction setup>>
(Continued)
• Pushing
• In case of no input (key operation) for approx. 5 seconds during
• For the air direction illustration during normal operation, the air
• While individual air direction is being set, the remote controller
• When selecting a case,
Outline of specifications
UNIT LOUVER
Louver select button enables every discharge
port to set up the air direction.
The louver numbers that are displayed on the display part
correspond to those in the following figure.
setting of individual air direction (during displaying of louver No.
on the remote controller screen), the remote controller screen
returns to the normal display screen.
direction of the least No. among the louvers which are block-set
is displayed.
operation (Illustration of air direction) and operation of the real
machine are linked.
UNIT
,
pushed or louver No. is not displayed, the air directions of all
the louvers are collectively set up.
Indoor unit
drain pipe
01
[F1]
4-way cassette type
04
[F4]
Drain pi pe
Compact 4-way cassette type
LOUVER
Louver select button is not
Indoor unit
refrigerant pipe
04
[F4]
Electrical
control box
03
[F3]
02
[F2]
03
[F3]
02
[F2]
01
Refrigerant pipe
[F1]
- 67 -
Remarks
Subject model :
4-way cassette
Compact 4-way
Setup from the remote
UNIT LOUVER
controller without
button is unavailable.