Table of Contents
Advertisement
Keep the Imager attached to the charger until the battery condition icon shows a full charge. If you remove the
Imager from the charger before a full charge shows, it can have a reduced run-time.
When the battery is connected to ac power or the unit is in video mode, the Sleep Mode/Auto Off feature
is disabled automatically.
Optional 12 V Vehicle Charger
1. Connect the 12 V adapter into the 12 V accessory socket of the vehicle.
2. Connect the output to the ac power socket of the Imager.
3. Charge until the indicator shows full on the screen.
4. Disconnect the 12 V adapter and Imager when battery is fully charged.
To prevent damage to the Imager, remove it from the dc car charger before you start or jump
start the vehicle.
•
Always operate in the specified temperature range.
•
Do not store the batteries in extreme cold environments.
•
Do not attempt to charge the batteries in extreme cold environments.
Do not incinerate the Product and/or battery.
Radio Frequency Data
See Table
13
for instructions on how to access digital copies of the Certificate IDs on the Imager.
To view the Radio Frequency Data Class B Instruction Sheet, visit
search for 4409209.
General Specifications
Temperature
Operating
Storage
Relative Humidity
Altitude
Operating
Storage
Display
Note
W Caution
~
W Caution
Ti300 PRO
Ti300+
-10 °C to 50 °C (14 °F to 122 °F)
-20 °C to 50 °C (-4 °F to 122 °F) without batteries
10 % to 95 % non-condensing
2000 m
12 000 m
8.9 cm (3.5 in) touchscreen diagonal landscape color VGA LCD with backlight
Professional Series Thermal Imagers
http://us.fluke.com/usen/support/manuals
Ti400 PRO
Ti401 PRO
Radio Frequency Data
Ti450 PRO
Ti450 SF6
and
Ti480 PRO
45
Advertisement
Table of Contents
