Table of Contents
Advertisement
Ti300 PRO, Ti300+, Ti400 PRO, Ti401 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO
Users Manual
3. When Saving... no longer shows on the display, you can move the Imager. If necessary, use a tripod to
stabilize the Imager while the images save.
•
In MultiSharp Focus mode, the Imager collects the images in the Imager and shows the focused image on
the display in ∼8 seconds for a 60 Hz model or ∼15 seconds for a 9 Hz model.
Confirm the image on the display is what you need. If possible, process the images on the Imager.
•
In MultiSharp Focus (In PC only) mode, the Imager collects the images in a single file and shows the
image on the display as it appears before you capture the image (∼2 seconds for a 60 Hz model or
∼5 seconds for a 9 Hz model).
In MultiSharp Focus (In PC only) Mode, you cannot view the focused image on the Imager. If possible,
download, process, and view the image(s) on your computer while you are at the job site. To view the
focused image, open the image with SmartView software.
Some targets have abnormal thermal characteristics that can cause the MultiSharp Focus algorithm to
fail. If MultiSharp Focus mode does not capture a clear image, use LaserSharp Auto Focus or Advanced
manual focus.
SuperResolution
SuperResolution uses a sensor to capture micro movements to create an image with double the resolution. See
Detailed Specifications
To use:
1. Capture an image.
2. Hold the Imager still for ∼1 second.
•
In SuperResolution mode, the Imager captures the data and processes the image. The image shows on
the display of the Imager in ∼18 seconds.
•
In SuperResolution (in PC only) mode, the image is not processed on the Imager so you cannot view the
image on the Imager. Use SmartView software to view the image on your PC.
Distance
Use the Laser Pointer/Distance Finder to measure the distance, up to 30 meters, from the Imager to a target.
You can choose to show the distance on the display in feet or meters. The distance is saved as part of the image.
To prevent eye damage and personal injury:
•
Do not look into the laser. Do not point the laser directly at persons or animals or indirectly off
reflective surfaces.
•
Do not open the Product. The laser beam is dangerous to eyes. Have the Product repaired only
through an approved technical site.
22
for the resolution available based on the model of the Imager.
Note
*W Warning
Advertisement
Table of Contents
