Fluke Ti300 PRO User Manual page 28

Ti300 PRO, Ti300+, Ti400 PRO, Ti401 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO
Users Manual
Option Menu
Start Capture
Interval
Auto Capture
Image Count
Manual Trigger
Temp Trigger
Set Temp Trigger
Bluetooth
Wireless WiFi Hotspot
WiFi Network
24
Table 12. Camera Menu (cont.)
Option
Select to capture and save an infrared image, or series of images
based on Auto Capture settings.
Sets the number of hours, minutes, or seconds between image
captures.
The minimum interval available can be affected by the file type
and visible light camera settings. Some combinations create
larger file sizes that take longer to capture and save and create a
higher minimum interval compared to others.
Sets a number of images to capture. Or, select Maximum Memory
to capture and save images until the chosen storage memory is full or
the battery runs out of power.
Select to immediately capture images when Start Capture is
selected.
Select to capture images when a value is above or below a set
temperature limit when Start Capture is selected.
With Temp Trigger selected, set the temperature and conditions to
trigger the auto capture of images.
Uses Bluetooth technology to connect the Imager to a device such as
a wireless headset. See
Uses the Imager to create a wireless Hotspot when no WiFi network
exists. See
Connects the Imager to a WiFi network so you can sign into your
Fluke Connect account on the Imager. See
Description
Note
Wireless Connectivity.
Wireless Connectivity.
Wireless Connectivity.