Table of Contents
Advertisement
10
218
Insert the wheel speed sensor
into the bore and tighten
screw 1 to the specified
torque.
z
Rear wheel speed sensor
to brake-caliper support
Thread-locking compound:
micro-encapsulated
8 Nm
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
After completing work, operate
the brake several times until
the brake pads are bedded.
Adjusting chain sag (
Air filter
Removing air filter
Removing the tank cover
(
222).
https://www.motorcycle-manual.com/
231).
Unclip hose 1 from retaining
lugs 2.
Press and hold down button 3
to unlock (arrow 1).
Pull frame 4 out of the holder
(arrow 2).
Advertisement
Table of Contents
