Lexmark MX-B427W User Manual page 23

Set up, install, and configure
Note: These instructions apply only to printers that have EXT and line ports.
•
Connect one end of the telephone cable to the line port of the printer.
•
Connect the other end of the cable to an active analog wall jack.
•
Connect the answering machine to the telephone port of the printer.
Connected to different wall jacks
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to an active analog wall jack.
Notes:
•
If you have only one telephone number on your line, then set the printer to receive faxes automatically.
•
Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer Rings to Answer setting to 6.
23