Paper - Lexmark MX-B427W User Manual

Use printer menus

Paper

Tray Configuration
Menu item
Default Source
Tray [x] (1*)
MP Feeder
Manual Paper
Manual Envelope
Paper Size/Type
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Substitute Size
Off
Letter/A4
All Listed*
Configure MP
Cassette*
Manual
First
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration
Universal Setup
Menu item
Units of Measure
Inches
Millimeters
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the paper source for all print jobs.
Note: MP Feeder appears only when Configure MP is set to Cassette.
Specify the paper size or paper type loaded in each paper source.
Set the printer to substitute a specified paper size if the requested size is not
loaded in any paper source.
Notes:
•
Off prompts the user to load the required paper size.
•
Letter/A4 prints A4‑size document on letter when loading letter, and
letter‑size jobs on A4 paper size when loading A4.
•
All Listed substitutes Letter/A4.
Set the printer when to pick paper loaded in the multipurpose feeder.
Notes:
•
When set to Cassette, the printer treats the multipurpose feeder like a
tray.
•
When set to Manual, the printer treats the multipurpose feeder like a
manual feeder.
•
When set to First, the printer picks paper from the multipurpose feeder
until it is empty, regardless of the required paper source or paper size.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
80