Lexmark MX-B427W User Manual page 104

Use printer menus
Menu item
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address
Autoconfiguration
On*
Off
IPv6
DNS Address
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off
Mac Binary PS
Auto*
On
Off
Energy Efficient Ethernet
Auto*
On
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
Specify the DNS server address.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Set the printer to switch automatically to PCL emulation when a print job
requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch automatically to PS emulation when a print job requires
it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Reduce power consumption when the printer does not receive data from the
Ethernet network.
104