Selecting A Ringer/Image Type For An Entry; Secret Contacts Entries; Dialing Pcs Services - Sanyo SCP-3100 Operating Manual

Selecting a Ringer/Image Type for an Entry

You can assign a ringer/image type to a Contacts entry so you can identify the caller by the
ringer or image type.
To select a ringer type for an entry:
1. Press the navigation key right.
2. Select the entry you want to set the incoming ringer or image, and press MENU/OK.
3. Press Options (right softkey).
4. Select Edit and press MENU/OK.
5. Select the menu under Ringer or Picture ID by scrolling up or down and press MENU/OK.
6. Select your desired ringer type or images and then press MENU/OK.
7. Press Save (left softkey).
To confirm the ringer, select Ringer and press Play (right softkey).
To see a display preview, press Preview (right softkey) during step 7 above. Then press Sub
LCD (right softkey) to see the Sub LCD preview. (You may also check the Image through
the external display.)
If you set an Animation Ringer and an Image, your PCS Phone plays the ringer of
Animation Ringer and displays the selected Image.

Secret Contacts Entries

You can hide an entry's phone number(s) and require your lock code to edit the entry by making
it secret. The entry name is still displayed, but the entry's phone number is replaced by
"<Secret>."
To make an entry secret:
1. Press the navigation key right.
2. Scroll to the Contacts entry you want to tag secret.
3. Press Options (right softkey) to display the menu options.
4. Select Set Secret and press MENU/OK.
5. Enter 4 digits lock code.
6. Select On and press MENU/OK.
To make an entry public, select Off during step 6 above.
Tip: If you can't recall your lock code, try using the last four digits of either your Social Security
number or PCS Phone Number or try 0000.

Dialing PCS Services

You must be in digital mode to access PCS Services.
To dial a service:
1. Press MENU/OK to access the main menu.
2. Select Contacts and press MENU/OK.
3. Select Services and press MENU/OK.
4. Select Cust Service, Dir Assistance, Account Info, or Voice Command and press
MENU/OK.
5. Press TALK or SPEAKER.
44