Fitting And Removing Safety Grilles - Volvo V60 TWIN ENGINE 2018 Owner's Manual

LOADING, STORAGE AND PASSENGER COMPARTMENT

Fitting and removing safety grilles*

The safety grille prevents loads or pets in the
cargo area from being thrown forward in the
passenger compartment under heavy braking.
The safety grille is crash-tested in accordance
with the ECE R17 legal requirement and fulfils
Volvo's strength requirements.
For safety reasons, the safety grille must always
be attached and anchored correctly.
WARNING
Under no circumstances may anybody remain
in the cargo area while the car is moving. This
is to avoid injury in the event of heavy braking
or an accident.
586
Installation
IMPORTANT
The safety grille must only be used in the rear
position (behind the rear seat) described
here.
Before first installing the safety grille, the existing
plastic roof mountings must be replaced with
steel roof mountings. Volvo recommends that
replacing roof mountings is performed at an
authorised Volvo workshop or retailer.
1. Fold the rear seat's backrest forward.
2. Make sure that the safety grille is turned in
the right direction. Lift in the safety grille
through one of the rear side doors.
3.
Position the safety grille's brackets on the
roof mountings.
The next step is facilitated if two people hold
the safety grille in the right position.
* Option/accessory.