Volvo V60 TWIN ENGINE 2018 Owner's Manual page 141

Voice control is done in dialogue form with the
user saying commands and receiving verbal
responses from the system. The voice recognition
system uses the same microphone as Bluetooth-
connected devices, and the voice recognition
system's responses are given via the car's speak-
ers. In some cases, a text message is also shown
in the driver display. Functions are controlled
from the right-hand steering wheel keypad. Set-
tings are made via the centre display.
System updating
The voice recognition system is continuously
improved. Download updates for optimal perform-
ance from support.volvocars.com.
Related information
Using voice recognition (p. 139)
•
Controlling a telephone with voice recogni-
•
tion (p. 140)
Voice control of radio and media (p. 141)
•
Controlling climate control with voice recog-
•
nition (p. 197)
Settings for voice recognition (p. 142)
•
Applies to certain markets.
17
17
Using voice recognition
Depress the steering wheel
button for voice recognition
to activate the system and
initiate a dialogue using voice
commands.
Remember the following:
Speak after the tone with a normal voice at a
•
normal tempo.
Do not speak while the system is replying
•
(the system cannot understand commands
during this time).
Avoid background noise in the passenger
•
compartment by having the doors, windows
and panoramic roof* closed.
Voice recognition can be deactivated as follows:
Cancel
briefly press and say "
•
a long press on the steering wheel button for
•
voice control until you hear two beeps.
To speed up communication and skip the
prompts from the system, press the steering
wheel button for voice recognition
system voice is speaking and say the next com-
mand.
DISPLAYS AND VOICE CONTROL
To change the system audio volume, turn the
rotary volume knob when the voice speaks. It is
possible to use other buttons during voice con-
trol. However, other sounds will be silenced dur-
ing dialogue with the system, which means that it
is not possible to execute any functions linked
with audio using the buttons.
Example of voice recognition control
Press , say " Call [Forename] [Surname]
[number category]
from the phone book. If the contact has several
phone numbers (e.g. home, mobile, work), the
right category must be referred to.
So press and say "
Mobile ".
Commands/phrases
The following commands can generally be used,
regardless of the situation:
".
Repeat
• " " - repeats the last voice instruction
in the ongoing dialogue.
Cancel
" " - discontinue the dialogue.
•
" Help " - starts a help dialogue. The system
•
replies with the commands available in the
current situation, a prompt or an example.
when the
Commands for specific functions such as phone
and radio are described in specific sections.
" - dials the selected contact
Call Robin Smith
}}
139
* Option/accessory.