Volvo V60 TWIN ENGINE 2018 Owner's Manual page 587

Full-cover position
Grip the handle and pull the cargo cover out
to the end position.
Hook the attachment pins into the recesses
at the cargo area's rear pillars.
> The cargo cover is locked in the full-cover
position.
Cargo cover in full-cover position.
IMPORTANT
Do not load objects on top of the cargo cover.
Loading mode
From the full-cover position:
–
Press the cargo cover's handle section
upwards slightly.
> The cover goes up until it stops in the
loading position.
Returning to full-cover position from loading posi-
tion:
1. Grip the handle and pull the cargo cover
down to the end position. To facilitate, angle
up the handle slightly so that the attachment
pins pass the stops.
LOADING, STORAGE AND PASSENGER COMPARTMENT
2. Release the handle so that the attachment
pins engage.
> The cover is locked in the full-cover posi-
tion.
IMPORTANT
The cargo cover may obscure the view to the
rear when in the loading position. Make sure
the cargo cover is fully extended or fully
retracted when driving.
Retracting
1. From the full-cover position:
Lift up the handle and pull it backward to dis-
engage the cargo cover's attachment pins
and then release.
From loading position:
Grip the handle and pull out the cargo cover
in the grooves - pull to the full-cover position.
Lift up the handle and pull it backward to dis-
engage the attachment pins and then
release.
2. Retract the cover with its attachment pins
outside of the side panels until it stops in the
retracted position.
Related information
Fitting and removing cargo cover* (p. 584)
•
585
* Option/accessory.