HYBRID INFORMATION
||
IMPORTANT
The ground fault breaker does not protect the
230 V socket (alternating current)/electrical
installation.
Control unit with only indicators
Control unit LED
4
lamps.
LED lamp 1
LED lamp 2
If the control module's built-in ground fault
breaker is tripped, LED lamp 2 flashes red while
LED lamp 1 is extinguished - check the 230 V
socket (alternating current).
LED (Light Emitting Diode)
4
410
Control unit with both indicators and
controls
If the control module's built-in ground fault
breaker is tripped then the car symbol illuminates
with red constant glow - check the 230 V socket
(alternating current).
IMPORTANT
Check the capacity of the socket.
•
Other electronic equipment connected to
•
the same fuse circuit must be discon-
nected if the total load is exceeded.
Do not connect the charging cable if the
•
socket is damaged.
Related information
Charging cable (p. 408)
•
The charging cable's control unit (p. 411)
•
Charging status in the charging cable's con-
•
trol unit (p. 417)