Checking And Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MM-29 Instruction Manual

Checking and Changing Programmed Tracks

You can check and change your selection of tracks at any time.
GB
You must have selected at least one track.
1
Press STOP ( ) once if you have started listening to the
selection.
2
Press PROGRAM/SET.
Each time you press PROGRAM/SET, the next
selection is displayed.
3
Press PROGRAM/SET one or more times until the track to be
changed is displayed.
4
Press SKIP
5
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
1
4
8
or to select the new track.
2 3
5
4

Searching for and Storing the Radio Stations

You can store up to:
15 FM station
8 MW station
7 LW station
1
Switch the system on by pressing POWER.
2
Select the TUNER function by pressing TUNER/BAND on the front panel.
3
Select the required frequency band by pressing TUNER/BAND
again on the front panel or TUNER/BAND on the remote control.
Result: The appropriate indication is displayed:
FM
MW
LW
4
To search for a Press TUNING MODE on the front
station... panel
Manually One or more times until MANUAL is displayed.
Automatically One or more times until AUTO is displayed.
5
Select the station to be stored by:
Pressing tuning DOWN or UP on the front panel
or
Pressing TUNING
To scroll through the frequencies faster when searching
manually, hold down the TUNING DOWN
buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
2 3
1
5
Frequency Modulation
Medium Wave
Long Wave
or on the remote control
or UP
4
5