Setting The Clock; Listening To A Compact Disc - Samsung MM-29 Instruction Manual

Setting the Clock

Your system is equipped with a clock which allows you to turn
your system on and aff automatically. You should set the clock:
GB
When you purchase the Micro compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing POWER.
2
Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
3
Press PROGRAM/SET.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press PROGRAM/SET.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press PROGRAM/SET.
Result: The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another
function, by pressing CLOCK once.
1
4 6
6
Press...
Press...
2
3 5 7
4 6

Listening to a Compact Disc

You can play 12 cm or 8 cm compact discs without an adapter.
1
Select the CD function by pressing CD on the front panel.
2
Open the compact disc compartment by pressing down and
releasing the cover.
3
Place your disc in the compartment, with the label on the disc
facing upwards.
4
Close the compartment by pushing down on the cover until it
clicks into place.
Result: The display indicates the number of tracks on the
disc.
5
Press the PLAY/PAUSE (
Result: The first track on the disc plays and the track
number is displayed.
6
To stop playback temporarily, press the PLAY/PAUSE (
button.
Press PLAY/PAUSE (
the disc.
7
To start playing
at the beginning of...
The next track
The current track
The previous track
The track of your choice
8
To search through
the tracks...
Forwards
Backwards
You are advised to turn the volume down before using
this function.
9
Press the STOP ( ) button when you have finished.
9
9
7 8
) button.
) again to continue playing
Press...
SKIP/SEARCH once
SKIP/SEARCH once
SKIP/SEARCH twice
SKIP/SEARCH or
the appropriate number of times
Press and hold down...
SKIP/SEARCH until you
reach the required point
SKIP/SEARCH until you
reach the required point
2 4
1
5 6
7 8
)