Checking Or Changing Programmed Tracks; Video Cd Player Playback - Samsung MAX-VN52 Instruction Manual

Checking or Changing Programmed
Tracks
GB
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, C is displayed
instead of P when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter C
(Change).
4
Press Program one or more times until the track to be changed is
displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
6
Press Tuning Down and Up to select a different track.
7
Press Program to confirm your change.
8
Press VCD/CD (
Result: The first track selected is played.
8
2,3,4,7
6
6
14
) to start listening to the selection.
5
6
1
NTSC/PAL Slow Single Step
b
TUNER Mono/ST. Echo
On/Off
BAND
Timer AI Off Counter Reset Deck 1/2
On/Off
TAPE
8
1
VCD / CD
Volume
6
Tuning
Mode
Volume

Video CD Player Playback

In order to playback video VIDEO-CD('S), make sure that your
unit is connected to your TV set.
This unit is designed for playback of video CD('S), version 1.1 and 2.0.
Only with version 2.0, is it possible to call up the on screen menu func-
tion. This unit will not play back any other video VIDEO-CD('S) other
than 1.1 and 2.0 versions.
1
Turn on the On/Standby switch and set the VCD mode.
2
Press the Open/Close ( ) button on the unit, to open the CD tray.
Result: "OPEN" is displayed and CD tray slides open.
3
Load a video-CD('S) with the label facing upwards in the tray.
4
Press the Open/Close ( ) button again to close the CD tray.
5
To playback:
In version 1.1, press the SELECT/
to the film, as there is no menu-on-screen.
In version 2.0, load a video CD, "Video CD2.0", and "MENU
ON" are displayed on the TV screen. Press the SELECT/
button and the menu is displayed on the TV screen. Select a
number from the menu using Menu + button or – button and
press the SELECT/ button.
When playing a video-CD('S) version 2.0, reading time on the
display may take longer, depending on the disc's contents.
6
Press SELECT/ button on the remote control to receive a still picture.
Result: Pause is displayed, a still picture appears and the sound is muted.
7
To return to normal playback, press SELECT/
8
Press the Stop ( ) button to stop playback.
Please make sure that the VIDEO-CD('S) to be played is not flawed
optically, as this may cause a distorted sound or the unit to malfunction.
1
Menu On/Off
CD Repeat
Disc Skip
Mute
NTSC/PAL
TUNER
BAND
Timer AI Off
On/Off
8
button for direct access
button.
2,4
5,6,7
Menu
#
Return Sound
5
Key Control
Slow Single Step
b
Mono/ST. Echo
On/Off
Counter Reset Deck 1/2
TAPE
5,6,7
VCD / CD