Connecting An Am(Mw/Lw) Aerial; Connecting An Fm Aerial - Samsung MM-29 Instruction Manual

Connecting the AM(MW/LW) Aerial
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM(MW) aerial connector terminals are located on the rear of the system and
are marked AM.
To avoid noise interference, check that the loudspeaker wires do not run
close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
DC JACK
DC IN 12V
ANTENNA
AM
FM (75 )
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75 antenna to the FM aerial terminal.
Plug the connector on the FM aerial supplied into the coaxial socket
(75 ) marked FM on the rear of the system.
Follow the instructions given on Page 8 to tune into a radio station,
and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear
of the system, using a 75 coaxial cable (not supplied).
GB
FM FM
75 COAXIAL CABLE
FM AERIAL
(not supplied)
(supplied)
5