Checking Or Changing Programmed Tracks; Tuner; Searching For And Storing The Radio Stations - Samsung MAX-6020 Instruction Manual

Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter
CH (Change).
4
Press Program one or more times until the track to be changed is
displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
6
Press Tuning Down and Up to select a different track.
7
Press Program to confirm your change.
8
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
Disc 1 Disc 2
Disc Selection / Direct Play
5
On/Standby
R
Demo
AI Off Timer Timer
/Sleep On/Off /Clock
8

TUNER

C D
Band
Mono/ST Memory Repeat Program
REC/Pause CD SYNC. Shuffle
2,3,4,7
REC Lock
Down Tuning Mode
es
6
1
EQ Disc Skip
2,3,4,7
Deck 1/2 AI Off
Sleep
1
6
CD
CD
VOL.
Disc 3
Disc Change
Volume
+
–
TAPE AUX
Deck 1/2 REV mode
TAPE TAPE REC
Normal HI-Speed
Up
6
Program
AUX
/Set
Mono/ST. Tuner
Band
TAPE
8
CD
VOL.
6
Tuning
Mode
CD
CD
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
5 MW stations
5 SW1stations
5 SW2 stations
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing TUNER on the front panel.
3
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Tuner (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
SW1, SW2
4
To search for a Press Tuning Mode
station...
Manually One or more times until MANUAL is displayed.
Automatically One or more times until AUTO is displayed.
5
Select the station to be stored by:
Pressing Tuning Mode Down or Up on the front panel
or
Pressing Tuning or
To scroll through the frequencies faster when searching manu-
ally, hold down the Tuning Mode Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
On/Standby
R
1
Demo
AI Off Timer Timer
/Sleep On/Off /Clock
2,3
TUNER C D
Band
Mono/ST Memory Repeat Program
REC/Pause CD SYNC. Shuffle
7
5
REC Lock
Down Tuning Mode
VOL.
Tuning
Tuning
Mode Mode
CD
CD
5
VOL.
Frequency Modulation
Medium Wave
Short Wave
on the remote control
Volume
+
–
TAPE AUX
Deck 1/2 REV mode
TAPE TAPE REC
Normal HI-Speed
4
5
Up
4
CD
CD
5
13
GB
6