Table of Contents
Advertisement
Listening to a Cassette
1
GB
Switch the system on by pressing POWER.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open the cassette deck by pushing on the corner of the cover
marked PUSH EJECT until you hear a click and then releasing it.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downwards.
5
Close the deck by pushing on it until it clicks into place.
6
To listen to...
Side A
Side B (MM-39 only)
Result:
The cassette starts playing.
7
Press any of the following buttons during playback, as required.
To...
Listen to the same track again
Listen to the next track
Listen to the previous track
Listen to the track of your choice
Result:
The number of tracks remaining is displayed and
changes as you move forward or backward
through the tracks.
If there are very quiet passages on a track, the
automatic search function may stop before the end of
the track. Also, a very short silence between two tracks
may not be detected.
8
To...
Adjust the volume
Stop the playback or search
9
When the cassette is stopped, select one of the following
functions as required.
To...
Rewind the cassette
Fast-forward the cassette
The cassette player stops automatically when the
beginning or end of the cassette is reached.
1
7
7 9
8
7 9
10
Press...
Press...
once
once
twice
or
the appropriate
number of times
Press...
VOLUME + or – (or the
VOLUME
and
buttons on the front panel)
STOP (
)
Press...
2
6
8
9
7 9
8
3 5
8
8
Selecting the Cassette Playback Mode
Your micro audio system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically.
You can select this function during playback or when the
cassette is stopped.
Press REV. MODE one or more times to display the required symbol.
When the display
The system plays back...
indicates...
One side of the cassette and then stops.
One side of the cassette
The other side of the cassette and then stops
Both sides of the cassette indefinitely (both sides
are played one after the other until you stop the
player).
Tape Counter
When playing a cassette, a counter is displayed to enable you to take
note of the counter value at the start of each track and thus start
playback at the beginning of the track to which you wish to listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of the
counter values at the beginning of each track, After the cassette tape
door is opened and closed again, the counter will be reset.
Maintaining the Sound Quality
To obtain the best possible results from your cassette player, you
must clean it regularly (heads, roller and drive capstan).
Open the deck by pressing the PUSH EJECT button. Use a cotton bud
and a special cassette cleaning agent to clean the:
Heads (
)
Roller (
)
Drive capstan (
)
To guarantee hours of enjoyable listening with your cassettes:
Check that the tape in the cassette is always sufficiently taut.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they are extremely fragile.
Hide quick links:
Advertisement
Table of Contents
