Gravely Pro-Stance 36 CARB Owner's/Operator's Manual page 34

1. Deck Lift-Assist Spring
Figure 28
NOTICE: Support mower deck on blocks or
jack stands before disconnecting links from
mower lift arms to prevent the deck from
falling.
3. Slowly lower deck to lowest position.
4. Remove hardware retaining mower lift
links attached to mower deck.
5. Remove front mounting pin hardware
and drag link mounting pins.
6. Slide mower deck out from under unit.
1
2
1
3
1. Mower Lift Arm
2. Mower Lift Link
3. Drag Link
4. Drag Link Mounting Pin
5. Mounting Hardware
6. Mounting Pin Hardware
Installing Mower Deck
(Figure 29)
1. Slide mower deck under unit.
2. Connect front drag links to deck with
drag link mounting pins.
3. Install link on mower lift arms in same
holes they were removed from.
4. Install PTO mower belt (see PTO Mower
Belt Replacement on page 32).
5. Connect deck lift-assist spring.
6. Level mower deck (see Leveling the
Mower Deck on page 34).
Leveling the Mower Deck
Make these adjustments on a level surface
with the tires inflated to the correct air
pressure.
EN - 34
4
Figure 29
5
6