Monitoring - Siemens SIPROTEC 5 V9.30 Manual

If you route the
the SIPROTEC 5 device, the signal is set as follows:
[scacquisipara, 1, en_US]
Figure 7-23
If the number of blocked signals changes from 0 to >0, the
incoming.
If the number of blocked signals changes from >0 to 0, the
outgoing.
[scacquisilog, 1, en_US]
Figure 7-24
For further information, see

Monitoring

7.3.5
[scwebmonitorUK, 3, en_US]
Figure 7-25
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Acq.blocking active signal to, for example, log U1 in the DIGSI information routing of
Information Routing
Content of the routed log
8.9.7 Acquisition Blocking and Manual
Monitoring Buttons
Operation Using a Browser-Based User Interface
Acq.blocking active signal is set to
Acq.blocking active signal is set to
Updating.
7.3 Buttons
133