Removing A Sealed Burner & Electrode - Fisher & Paykel DCS RGS Series Service Manual

REMOVING A SEALED BURNER & ELECTRODE
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Turn off the gas and disconnect power to the range.
2. Remove the grates from the range.
Grates
3. Remove the burner cap and port ring from the
burner.
Burner Cap
SERVICING THE COMPONENTS
Port Ring Volcano
4. Remove the 1-1/16ʺ venturi nut from the simmer ring
and lift the ring off the burner base.
Venturi Nut
5. Remove the 13/16ʺ venturi from the burner base.
6. Lift the burner base off the cooktop and disconnect the
wire from the electrode terminal.
Electrode Wire
23
Venturi
Burner Base
Continued on the next page.