Burner Use - Fisher & Paykel RIV3365 User Manual

Selecting and using burners
1
2
3
4
46

BURNER USE

Identify the desired burner and the
corresponding dial.
Push the dial in and turn counterclockwise
to
LITE.
to a flame setting.
Note: You should hear a clicking sound
when setting to
present, turn the dial back clockwise to
and refer to 'Troubleshooting' for advice.
When the burner is lit, turn the dial to any
setting between
Note: The clicking should stop as soon as
the burner is lit. If the burner doesn't light,
and/or the clicking doesn't stop, turn
the dial clockwise back to
'Troubleshooting' for advice.
When you have finished cooking, turn the
knob clockwise back to
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
Hold the dial at
LITE
. If no clicking sound is
LITE
(high) and
HI
OFF
before turning
OFF
(simmer).
SIM
refer to
OFF
.