Sharp MX-B707F User Manual page 92

Understanding the printer menus
Menu item
Secondary SMTP Gateway
Secondary SMTP Gateway Port
1–65535 (25*)
SMTP Timeout
5–30 seconds (30*)
Reply Address
Always use SMTP default Reply Address
On
Off*
Use SSL/TLS
Disabled*
Negotiate
Required
Require Trusted Certificate
Off
On*
SMTP Server Authentication
No authentication required*
Login / Plain
NTLM
CRAM‑MD5
Digest‑MD5
Kerberos 5
Device‑Initiated E‑mail
None*
Use Device SMTP Credentials
User‑Initiated E‑mail
None*
Use Device SMTP Credentials
Use Session User ID and Password
Use Session E‑mail address and Password
Prompt user
Use Active Directory Device Credentials
Off*
On
Device Userid
Device Password
Kerberos 5 REALM
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Type the server IP address or host name of your secondary or
backup SMTP server.
Enter the server port number of your secondary or backup SMTP
server.
Set the time before the printer times out if the SMTP server does
not respond.
Specify a reply address in the e‑mail.
Always use the default reply address in the SMTP server.
Specify whether to send e‑mail using an encrypted link.
Require a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
Specify whether credentials are required for device‑initiated e‑mail.
Specify whether credentials are required for user‑initiated e‑mail.
Specify whether credentials are required for user‑initiated e‑mail.
Specify the user ID and password to connect to the SMTP server.
Specify the realm for the Kerberos 5 authentication protocol.
92