Sharp MX-B707F User Manual page 65

Understanding the printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply Address
(Off*)
Use SSL/TLS (Disabled*)
Require Trusted Certificate (On*)
SMTP Server Authentication
(No authentication required*)
Device‑Initiated E‑mail (None*)
User‑Initiated E‑mail ((None*)
Use Active Directory Device Credentials
(Off*)
Device Userid
Device Password
Kerberos 5 REALM
NTLM Domain
Disable "SMTP server not set up" error (Off*)
Error Prevention
ADF Multifeed Sensor
Off
On*
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure an SMTP server to send e‑mail to a group of pre-
defined e-mail addresses when certain events occur on the
printer.
Detect when the ADF picks more than one sheet of media at
once.
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
Set the printer to restart when an error occurs.
65