Sharp MX-B707F User Manual page 103

Understanding the printer menus
Advanced Imaging
Menu item
Color Balance
Cyan (0*)
Magenta (0*)
Yellow (0*)
Color Dropout
Color Dropout (None*)
Default Red Threshold (128*)
Default Green Threshold (128*)
Default Blue Threshold (128*)
Auto Color Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
Scan Bit Depth (1 bit*)
Scan Bit Depth
1 bit
8 bit*
JPEG Quality
Best for content*
5–95
Contrast
Best for content*
0–5
Background Removal
Background Detection (Content‑based*)
Level (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the color intensity for cyan, magenta, and yellow.
Specify which color to drop during scanning, and adjust the dropout
setting for that color.
Configure the auto color detection setting.
Enable the Text/Photo mode to have smaller file sizes by using 1‑bit
image.
Note: This menu item appears only when Color is set to Gray.
Set the JPEG quality of the scanned image.
Specify the contrast for the scanned image.
Remove the background color or image noise from the original
document.
Notes:
•
Content-based removes the background color from the original
document.
•
Fixed removes image noise from a photo.
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the shadow detail in the scanned image.
Scan the original document from edge to edge.
103