Sharp MX-B707F User Manual page 62

Understanding the printer menus
Menu item
Screen Brightness
20–100% (90*)
Flash Drive Access
Enabled*
Disabled
Allow Background Removal
Off
On*
Allow Custom Job scans
Off
On*
One Page Flatbed Scanning
Off*
On
Express Scanning
Off*
On
Output Lighting
Off
On*
Audio Feedback
Button Feedback (On*)
Volume (5*)
Screen Timeout
5–300 seconds (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Eco-Mode
Menu item
Print
Sides
1‑Sided*
2‑Sided
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the brightness of the display.
Enable access to the flash drive.
Specify whether background removal is allowed.
Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.
Note: This menu setting appears only when a hard disk is
installed.
Set the printer to scan any type of job involving the scanner
glass as a single page.
Note: The printer returns to the home screen after
performing a single flatbed scan instead of displaying
prompts.
Set the initial scanning speed point to the fastest speed.
Enable the integrated output light or indicator light of an
optional output bin.
•
Enable audio feedback for button presses, panel
interactions, paper loaded prompts, and error notifications.
•
Adjust the feedback volume.
Set the idle time before the display shows the home screen or
before the printer logs out a user account automatically.
Description
Specify whether to print on one side or two sides of the paper.
62