Sharp MX-B707F User Manual page 70

Understanding the printer menus
Menu item
Printer Emulations
Emulator Security
Disable Printer Message Access
Off
On*
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Fax Configuration
Fax Storage Location
NAND
Disk*
Print Configuration
Font Sharpening
0–150 (24*)
Print Configuration
Print Density
1–5 (3*)
Copy Density
1–5 (3*)
Print Configuration
A4 Fuser
Compress*
Clip
Device Operations
Quiet Mode
Off*
On
Device Operations
Safe Mode
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Disable access to printer message during emulation.
Set fax to enter Sleep mode whenever the printer determines
that it should.
Set the storage location for all faxes.
Note: This menu item appears only when a hard disk is
installed.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Adjust the toner density when printing or copying documents.
Set the fuser behavior when printing on a letter-size paper.
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the overall
performance of the printer.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
70