General Information
The Model 710 Dispense Valve is an On/Off valve
designed for a continuous flow of viscous material
through a dispense needle in automatic, semi-automatic
or manual applications. It is shipped complete with the
following:
•
Model 710 Dispense Valve
•
Two 3 foot (.9 m) sections of pneumatic air line
•
Seal Kit
•
Operating and Maintenance Manual
Safety Information
This product should be used only by employees who
have been given appropriate training and safety warn-
ings as set forth in this manual. Read completely before
operating.
Do not exceed 100 psi (6.9 bar) pressure on the oper-
ating system. Do not exceed 1200 psi (82.7 bar)
material inlet pressure. Higher pressures may cause
serious injury or equipment damage.
NOTE: The minimum recommended pneumatic operat-
ing system pressure is 70 psi (4.8 bar) clean/dry air.
Illustration References
Throughout this manual you will find references by illus-
tration item number to the illustrations in the manual.
The references are indicated by parentheses around a
number such as: (7). Illustrations represent typical valve
configurations. The drawings for your exact model are
inserted at the back of the manual and include the part
numbers for ordering replacement parts.
332094C
General Accessories
Graco offers a full line of standard and custom accesso-
ries for your dispensing needs including:
•
Valve Controllers
•
Syringe Feed Systems
•
Cartridge Retainers and Pressure Reservoirs
•
Titan 200 High Pressure Cartridge Feed Systems
•
Transfer Pump Feed Systems for 1, 5 and 55 gallon
containers
•
Mounting Bases and Brackets
•
Custom Needles and Needle Blocks
Consult your Dispensit dealer or the factory for details.
General Information
5