User Settings - Daikin EPRA10EAV3 Installer's Reference Manual

10.5.7 User settings

Language
EPRA08~12EAV3+W1 + ETSH/X(B)12P30+50EF
Daikin Altherma 3 H MT ECH₂O
4P663478-1B – 2022.07
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
Example: setpoint (T )≤maximum heat pump temperature–[6‑01] (T
U
T
DHW
T
50
HP MAX
T =T
45
U HP OFF
T
43
HP ON
40
30
20
HP
10
5
HP Heat pump. If heating up time by the heat pump takes too long, auxiliary heating by
the backup heater can take place
T Maximum heat pump temperature at sensor in storage tank
HP MAX
T Heat pump OFF temperature (T
HP OFF
T Heat pump ON temperature (T
HP ON
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
INFORMATION
The maximum heat pump temperature depends on the ambient temperature. For
more information, see the operation range.
WD curve
When weather-dependent operation is active the desired tank temperature is
determined automatically depending on the averaged outdoor temperature: low
outdoor temperatures will result in higher desired tank temperatures as the cold
water tap is colder and vice versa.
Also see "10.4 Weather-dependent
Overview
The following items are listed in the submenu:
7
Space heating/cooling
Tank

User settings

Information
Installer settings
# Code
[7.1] N/A
[6-00]
t
−[6-01])
HP MAX
−[6-00])
HP OFF
4
curve" [ 157].
[7] User settings
[7.1] Language
[7.2] Time/date
[7.3] Holiday
[7.4] Quiet
[7.5] Electricity price
[7.6] Gas price
Description
Language
10 Configuration
|
–[6‑01])
HP MAX
Installer reference guide
195