Setting The State Activity - SMC Networks TigerSwitch SMC6709FL2 Management Manual

Setting the State Activity

Use the State Activity page to set the port members to actively or passively
initiate an LACP trunk.
Field Attributes
• Port – Lists all ports that can be configured as LACP trunk members.
• State Activity
- Active – A port can automatically initiate a trunk if an LACP partner
is detected at the other end of the link.
- Passive – A port can only create a trunk if an LACP partner at the
other end of the link sends a request to initiate the trunk.
Console – Click Protocol Related Configuration=>LACP=>State Activity.
Specify the ports which can actively initiate an LACP trunk, and save your
settings.
Tiger Switch 10/100 6709FL2 : LACP Port State Active Configuration
===========================
actions->
Tab=Next Item BackSpace=Previous Item
P
ROTOCOL
Port
---------------------------
1
2
3
4
5
6
7
8
<Edit>
Select the action menu.
R
ELATED
State Activity
Passive
Passive
Passive
Passive
Passive
Active
Passive
Active
<Save>
Quit=Previous Menu
C
ONFIGURATION
<Quit>
Enter=Select Item
M
ENU
4-55