Specifying Trap Managers - SMC Networks TigerSwitch SMC6709FL2 Management Manual

C I
ONSOLE NTERFACE

Specifying Trap Managers

You can use the Trap Managers page to specify up to five management
stations that will receive authentication failure messages and other trap
messages from the switch.
Field Attributes
• IP – IP address of trap manager.
• Community Name – A community string acts as a password and
allows the trap manager to receive trap messages via the SNMP protocol.
Console – Click Protocol Related Configuration=>SNMP=>Trap
Managers. Click <Add> to open the Add SNMP Trap Manager page. Fill
in the IP address and community string for a trap manager, then save your
settings.
actions->
Tab=Next Item
4-50
Tiger Switch 10/100 6709FL2 : Add SNMP Trap Manager
===========================
IP :192.168.16.1
Community Name :private
<Edit>
Select the action menu.
BackSpace=Previous Item
<Save>
Quit=Previous Menu
<Quit>
Enter=Select Item