Setting Up Tcp/Ip - SMC Networks Barricade SMC7004ABR User Manual

4. Double-click Protocol.
5. Choose Internet Protocol (TCP/IP). Click the OK button to
return to the Network window.
6. The TCP/IP protocol will be listed in the Network window.
Click OK to complete the installation procedure.

Setting Up TCP/IP

To access the Internet through the Barricade Router, you must
configure the network settings of the computers on your LAN to
use the same IP subnet as the Barricade Router. The default
network settings for the Barricade Router are:
Gateway IP Address: 192.168.2.1
Setting Up TCP/IP
11