Binding Setting - SMC Networks BARRICADE N SMCWBR14SN5V2 User Manual

This page displays the IP & MAC Binding Setting table; you can
B S
INDING ETTING
configure it as needed (as shown in
Figure 92: Binding Setting
◆
◆
◆
◆
When you want to add or modify an IP & MAC Binding entry, you can click
the "Add New" button or "Modify" button, and then you will go to the next
page. This page is used for adding or modifying an IP & MAC Binding entry
(as shown in
Figure 93: IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1.
2.
3.
4.
MAC Address - The MAC address of the controlled computer in the
LAN.
IP Address - The assigned IP address of the controlled computer in
the LAN.
Bind - Check this option to enable ARP binding for a specific device.
Modify - To modify or delete an existing entry.
Figure 93).
Click the Add New... button as shown in
Enter the MAC Address and IP Address.
Select the Bind checkbox.
Click the Save button to save it.
– 102 –
| Configuring the Router
C 4
HAPTER
Figure 92).
Figure 92.
IP & MAC Binding