C
I
ONSOLE
NTERFACE
Spanning Tree Protocol Menu
Use the STP menu to configure the Spanning Tree Protocol. STP detects
and disables network loops and provides backup links between switches,
bridges, and routers to ensure that only one route exists between any two
stations on the network. The backup links automatically take over when a
primary link goes down.
Tab=Next Item
Menu
STP Enable/Disable
System Configuration
Perport Configuration
4-40
Tiger Switch 10/100 6709FL2 : Spanning Tree Protocol
===========================
STP Enable
System Configuration
Perport Configuration
Previous Menu
Enabled or disabled the Spanning Tree Protocol.
BackSpace=Previous Item
Description
Enables/disables Spanning Tree Protocol
Configures global bridge parameters for STP
Configures port-specific parameters for STP
Enter=Select Item
Page
4-41
4-43
4-45