SMC Networks EZ Connect SMCWEB-N User Manual page 40

State
State for sessions that use the TCP protocol.
•
NO: None -- This entry is used as a placeholder for a future connection that may occur.
•
SS: SYN Sent -- One of the systems is attempting to start a connection.
•
EST: Established -- the connection is passing data.
•
FW: FIN Wait -- The client system has requested that the connection be stopped.
•
CW: Close Wait -- the server system has requested that the connection be stopped.
•
TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
•
LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
•
CL: Closed -- The connection is no longer active but the session is being tracked in case there are
any retransmitted packets still pending.
Priority
The priority given to packets sent wirelessly over this conversation by the WISH logic. The priorities are:
•
BK: Background (least urgent).
•
BE: Best Effort.
•
VI: Video.
•
VO: Voice (most urgent).
Time Out
The number of seconds of idle time until the access point considers the session terminated. The initial
value of Time Out depends on the type and state of the connection.
300 seconds
UDP connections.
240 seconds
Reset or closed TCP connections. The connection does not close instantly so that lingering packets
can pass or the connection can be re-established.
7800 seconds
Established or closing TCP connections.
36