SMC Networks EZ Connect SMCWEB-N User Manual page 28

Current PIN
Shows the current value of the access point's PIN.
Reset PIN to Default
Restore the default PIN of the access point.
Generate New PIN
Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN
to the user interface of the registrar.
Add Wireless Station
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual configuration, prompt
you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device
supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the
configuration button on the device and then the on the access point within 60 seconds. The status LED on the
access point will flash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. Access to the wireless network is controlled
by a "registrar". A registrar only allows devices onto the wireless network if you have entered the PIN, or
pressed a special Wi-Fi Protected Setup button on the device. The access point acts as a registrar for the
network, although other devices may act as a registrar as well.
24