SMC Networks EZ Connect SMCWEB-N User Manual page 31

Time Configuration
Current Time
Displays the time currently maintained by the access point. If this is not correct, use the following options to
configure the time correctly.
Time Zone
Select your local time zone from pull down menu.
Enable Daylight Saving
Check this option if your location observes daylight saving time.
Daylight Saving Offset
Select the time offset, if your location observes daylight saving time.
DST Start and DST End
Select the starting and ending times for the change to and from daylight saving time. For example, suppose
for DST Start you select Month="Oct", Week="3rd", Day="Sun" and Time="2am". This is the same as saying:
"Daylight saving starts on the third Sunday of October at 2:00 AM."
Set the Date and Time Manually
If you do not have the NTP Server option in effect, you can either manually set the time for your access point
here, or you can click the
using. (Make sure that computer's time is set correctly.)
Note: If the access point loses power for any reason, it cannot keep its clock running, and will not have the correct
time when it is started again. To maintain correct time for schedules and logs, either you must enter the correct time
after you restart the access point, or you must enable the NTP Server option.
Copy Your Computer's Time Settings
button to copy the time from the computer you are
27