Renault KANGOO Vehicle User Manual page 78

FRONT SEATS
(5/7)
9
10
C
Van version flat position
The seatback on the passenger side
may be folded down onto the seat base
to create a flat position.
– Deactivate the front passenger
airbag ➥ 1.131 ;
– check that the floor is clear of any
objects;
– unlock the seat base by lifting the
handle 10 and move the seat for-
wards, onto the floor (movement D)
by taking it by the rear section C;
1.64
E
D
– press on the seat base to ensure
that it is correctly positioned on the
floor. There is a risk the seatback
being scratched if it is incorrectly po-
sitioned;
– remove the headrest 9 from the seat;
– store the headrest 9 in its housing
under the seat base;
– unlock the seatback by lifting
handle 10 again and position it hori-
zontally (movement E).
9
F
The label F on the side of the seat base
reminds you of these instructions.
Do not use the headrest
housing 9 to store any other
objects.
Risk of damage to the
seat wiring.