Towing - Renault KANGOO Vehicle User Manual

TOWING: breakdown
Before any towing, including on a flat-
bed truck, put the gear control in N po-
sition, unlock the steering column and
release the parking brake.
The speed specified by current legis-
lation for towing must always be ob-
served.
If you are driving the towing vehicle,
do not exceed the permissible towing
weight for your vehicle ➥ 6.7.
To carry out breakdown recovery on
a flatbed or to tow the vehicle using a
towing point (see the next page), ob-
serve the following instructions:
– Insert the key into the ignition and set
to "On" "ON" position 2 or, depend-
ing on the vehicle, with the card in
the passenger compartment, press
the start button;
– Set the gear control to N position;
– The steering column unlocks. The
accessories functions are supplied:
you can use the vehicle lighting func-
tions (hazard warning lights, brake
lights, etc.). At night the vehicle lights
must be on;
5.40
(1/2)
– Depending on the vehicle, after un-
locking the steering column, press
the engine start button for approxi-
mately two seconds;
– Depending on the vehicle, once you
have finished towing, press and hold
the engine start button for approxi-
mately two seconds (risk of running
down the battery).
Do not leave the tools unsecured inside the vehicle as they may come
loose under braking. After use, ensure that the tools are correctly placed
in their support, positioned correctly in their housing, attach the strap,
then make sure that the tool kit access flap is properly locked.
Risk of injury.
Choice of towing
It is strictly forbidden to tow the vehicle
with the front wheels on the ground.