Renault KANGOO Vehicle User Manual page 295

STOP AND GO ADAPTIVE CRUISE CONTROL
8
11
9
10
Displays
Stop and Go adaptive cruise con-
8
trol warning light.
9 Vehicle in front.
10 Stored safe distance
Stored cruising speed.
11
Important: you should keep
your feet near the pedals at
all times to prepare for any
event.
(3/14)
Switching on
Press switch 5.
Warning light  appears in grey, and
the message "Adaptive Cruise Ctl ON"
appears on the instrument panel, ac-
companied by dashes to indicate that
the cruise control function is activated
and waiting to store a cruising speed.
This function cannot be activated when:
– the parking brake is applied;
– the Park Assist function is already
activated ➥ 2.133.
The message "Adaptive Cruise Ctl una-
vailable" is displayed on the instrument
panel.
Activating cruise control
When the vehicle is stationary or
moving at a steady speed (for all ve-
hicles), press switch 6 (SET/-) or 7
(RES/+) to activate the function and
store the current speed. The minimum
cruising speed is 19 mph (30 km/h).
The cruising speed 11 replaces the
dashes and the cruise control function
is confirmed by the display of the cruis-
ing speed in green along with the
warning light. If you try to activate the
function while the vehicle is moving at
a speed over 84 mph (135 km/h), the
message "Invalid Speed" is displayed
and the function remains deactivated.
Once a cruising speed is memorised
and the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
If your vehicle speed is lower than
about 19 mph (30 km/h), the func-
tion uses a default cruising speed of
19 mph (30 km/h). The vehicle will
accelerate until it reaches the stored
cruising speed.

2.93