Renault KANGOO Vehicle User Manual page 405

REAR SEATS
: long chassis version (16/18)
24
To install seats
Before fitting a seat, check that it is in
the correct position in the vehicle.
The information can be found on the
label 24 located on the back of the seat.
The seats must not be swapped.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger's arm or
leg, a pet, gravel, cloth, toys, etc.).
25
– Attach the hooks 25 to the anchorage
point 26 marked with an arrow 27 by
gently lifting the back of the seat;
– Move the seat as far forward as pos-
sible (movement J);
– The release switch 23 locks, accom-
panied by a locking noise;
– Reconnect the connector 17.
26
J
26
25
27
17
23
3.59