SATO RWG500 Quick Manual page 23

Basic Operation (cont'd)
3
Start the automatic rewinding by printing labels on
the printer. Each time a label is printed, the
rewinder automatically winds it outwards and
takes up any slack in the winding process.
4
When the rewinding is completed, press the
START/STOP button on the rewinder's control
panel. The tension arm comes to rest and stops
automatically. The Status LED blinks in green to
signal the rewinder's idling
status.
5
Remove the label on the printer, and then remove
the wound label on the rewinder. The wound label
can be removed easily because the tension arm is
inactive.
23